What's in the drawings
Three pieces, drawn as a set so the seat height, table height and clearances work together. Drawings are dimensioned; pinch or zoom to read the smaller callouts.
The booth
An L-shaped bench, 3 ft tall overall with a seat at 1 ft 6 in. The whole underside is storage — three doors along the long run and a taller cabinet in the return. The back is a vertical slat panel that stops at seat height.
- Overall height
- 3 ft
- Seat height
- 1 ft 6 in.
- Long run
- 5 ft 6 in.
- Return
- 1 ft 6 in.
- Toe kick
- 3 1/2 in.
- Seat doors
- 1 ft 3 1/2 in. × 1 ft 1 1/4 in.
- Seat openings
- 1 ft 2 5/8 in. × 1 ft 1/4 in.
- End cabinet door
- 2 ft 7 1/4 in. × 1 ft 4 in.
- End cabinet opening
- 2 ft 6 1/4 in. × 1 ft 3 in.
The table
A trestle table sized to the booth — long enough to seat the full run of the bench, with the legs pulled in so nobody straddles one getting into the seat. Angled braces run from the trestle feet up to the top.
- Top
- 96 in. × 44 3/4 in.
- Between legs
- 61 in.
- Foot
- 23 5/8 in.
- Brace
- 29 13/32 in.
The sideboard
A 4 ft wide piece standing 5 ft tall, with the work surface at 3 ft and two drawers under it. Open shelving below, and a slatted back panel above the top that matches the booth.
- Overall
- 4 ft wide × 5 ft tall
- Top surface
- 3 ft
- Slat panel
- 1 ft 7 1/2 in.
- Panel width
- 3 ft 9 in.
- Middle shelf
- 10 in. below top
- Bottom rail
- 3 in. off the floor
